i. To recover the default IP address and password, please follow the     following steps.
ii. Remove power, and press and hold the button in the back of IP CAMERA.

iii. Power on the camera. Don’t release the button during the system booting.

iv. It will take around 30 seconds to boot the camera.
v. Release the button when camera finishes proceed.
vi. Re-login the camera using the default IP (http://192.168.1.200), and user 
     name (admin), password (admin).

Factory Default steps

i. Removing an Ethernet cable.
ii. Plugging “a pink default cable” into “GND”(you can see the “GND” in the green terminal).

iii. Plug power cable.

iv. When camera starts again, please remove the pink default cable and plug Ethernet cable for new setting.
v. Release the button when camera finishes proceed.
    Re-login the camera using the default IP (http://192.168.1.200), and user name (admin), password (admin).